Electrical System Maintenance; Electrical System Safety; Disconnecting The Battery - Toro Reelmaster 5610 Operator's Manual

Figure 84
1. Screen (fuel pick-up tube)
2. Fuel tank
4. Remove the fuel pick-up tube and rubber
bushing from the tank.
5. Clean the screen at the end of the fuel pick-up
tube (Figure 84).
6. Insert the fuel pick-up tube and rubber bushing
into the tank until the bushing is seated into the
tank.
7. Assemble the hose onto the fuel pick-up tube
and secure it with the clamp.
8. Lower and latch the seat; refer to
Seat (page 41).
g369410
3. Hose clamp
4. Hose
Lowering the
Electrical System
Maintenance

Electrical System Safety

•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.

Disconnecting the Battery

DANGER
Battery electrolyte contains sulfuric acid,
which is fatal if consumed and causes severe
burns.
• Do not drink electrolyte and avoid contact
with skin, eyes, or clothing. Wear safety
glasses to shield your eyes and rubber
gloves to protect your hands.
• Fill the battery where clean water is always
available for flushing the skin.
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Open the screen; refer to
(page 40).
3. Press the sides of the battery cover, and remove
the cover from the battery tray
49
40).
Opening the Screen
(Figure 85).