Toro Reelmaster 5610 Operator's Manual page 25

Tilt-Steering Pedal
To tilt the steering wheel toward you, press the foot
pedal (Figure 43) down, and pull the steering tower
toward you to the most comfortable position and then
release the pedal.
Throttle Control
Move the throttle control
increase the engine speed and rearward to decrease
speed.
Figure 44
1. Lower mow/raise control
lever
2. Key switch
3. InfoCenter
Key Switch
The key switch (Figure
O /P , and S
N REHEAT TART
Lower Mow/Raise Control Lever
This lever (Figure 44) raises and lowers the cutting
units and also starts and stops the cutterheads when
the cutterheads are enabled in the mow mode.
Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure 44).
Enable/Disable Switch
Use the enable/disable switch
conjunction with the lower mow/raise control lever
to operate the cutterheads. The cutterheads cannot
be lowered when the mow/transport lever is in the
T position.
RANSPORT
(Figure 44) forward to
4. Enable/disable switch
5. Throttle control
6. Headlight switch
44) has 3 positions: O
.
(Figure 44) in
Backlap Levers
Use the backlap levers in conjunction with the lower
mow/raise control lever for backlapping the reels
(Figure 45).
g025902
1. Backlap levers
Hydraulic Filter Restriction
Indicator
With the engine running at normal operating
temperature, view the indicator
,
FF
be in the Green zone. When the indicator is in the
Red zone, change the hydraulic filters.
1. Hydraulic filter restriction indicator
25
Figure 45
(Figure 46); it should
Figure 46
g021209
g004132