Tilting The Seat; Lowering The Seat; Jacking Point Locations - Toro Reelmaster 5610 Operator's Manual

Figure 61
1. Ball pin
2. Insert the ball pin through the screen latch.

Tilting the Seat

1. Move the seat latch outward
Figure 62
1. Seat latch
2. Carefully rotate the seat up.
3. Ensure that the forward prop rod seats in the
slot detent of the rod-guide plate
g378174
2. Screen latch
(Figure 62).
g369007
(Figure 63).
1. Prop rod

Lowering the Seat

1. Rotate the seat slightly, and lift the prop rod out
of the dent of the seat support slot
1. Prop rod
2. Carefully lower the seat until it latches securely.

Jacking Point Locations

Note:
Support the machine with jack stands
whenever you work under the machine; refer to
Jacking Point Locations (page
Use the following as machine-lift points:
41
Figure 63
2. Rod-guide plate
(Figure
Figure 64
2. Rod-guide plate
41).
g369008
64).
g375779