Installing The Transport Wheels; Installing The Hitch Assembly - Toro GreensPro 1260 Operator's Manual

1
Installing the Transport
Wheels
Parts needed for this procedure:
2 Transport wheel
Procedure
1. Remove the lug nuts securing the wheel hubs to the
shipping brackets (Figure
threaded onto the stud of each wheel hub.
1. Lug nut
2. Carefully remove the shipping brackets from the crates.
3. Install the transport wheels onto the wheel hubs with
the lug nuts. Hand-tighten the lug nuts.
Note: The lug nuts will be torqued at the completion
of step 2.
4. Adjust the tire pressure to 103 kPa (15 psi).
3). Also, remove the nuts
Figure 3
2. Shipping bracket
2

Installing the Hitch Assembly

Parts needed for this procedure:
1 Lock bracket
4 Bolt (M10 x 30 mm)
4 Lock washer (M10)
6 Washer (M10)
4 Nut (M10)
1 Hitch assembly
1 Bolt (M10 x 100 mm)
1
Locknut (M10)
1 Bolt (M12 x 100 mm)
2 Washer (M12)
1 Locknut (M12)
2 Spacer washer (when applicable)
Procedure
1. Install the lock bracket to the frame of the machine as
shown in Figure
Note: Torque the nuts to 52 N∙m (38 ft-lb).
1. Bolt—M10 x 30 mm (4)
2. Lock washer—M10 (4)
3. Washer—M10 (4)
2. Secure the hitch to the hitch pivot bracket with the
appropriate hardware; refer to
•
In the front holes, use a bolt (M10 x 100 mm), 2
washers (M10), and a locknut (M10).
11
4.
Figure 4
4. Nut—M10 (4)
5. Lock bracket
Figure 5.