Brake Maintenance; Checking And Adjusting The Parking Brake; Cleaning - Toro GreensPro 1260 Operator's Manual

Brake Maintenance

Checking and Adjusting the
Parking Brake
Service Interval: Before each use or daily
Ensure that the parking brake prevents the machine from
rolling when it is parked.
Adjust the parking brake as follows:
•
To increase the brake force, tighten the brake locknut
(Figure 38).
•
To decrease the brake force, loosen the brake locknut
(Figure 38).
Figure 38
1. Brake locknut
Note: Ensure that the brake fully disengages when the brake
handle is in the disengaged position.

Cleaning

Clean off the rollers as needed by spraying water through the
holes in the roller housings
1. Access holes
Ensure that the area around the hydraulic motor is clean by
removing any dirt and debris
1. Hydraulic motor
34
(Figure 39).
Figure 39
(Figure 40).
Figure 40