Product Overview; Controls - Toro GreensPro 1260 Operator's Manual

Product Overview

Figure 10
1. Hitch-lock lever
2. Hitch latch
3. Seat-adjustment lever
4. Parking brake
5. Steering wheel
6. Light switch
2
1
1. Spark plug
2. Muffler
3. Air cleaner
7. Motion pedals
8. Tilt-steering pedal
9. Hour meter
10. Latch lever
11. Hitch pedal
12. Hitch assembly
3 4
5
Figure 11
4. Recoil starter
5. Recoil-start handle

Controls

Note: Refer to your engine owner's manual for complete
control information.
Parking Brake
Engage the parking brake to allow the machine to start.
To engage the parking brake
parking-brake lever. To disengage it, push the lever forward.
1. Parking
brake—disengaged
Steering Wheel
Turn the steering wheel
machine in the forward direction.
Turn the steering wheel counterclockwise to turn the machine
in the rearward direction.
Note: As the direction changes at the end of every run, you
will need to practice with the machine to become accustomed
to the steering.
The steering wheel controls the angle of the smoothing
rollers, which in turn steer the machine. The amount the
wheel can be turned is limited, so the turning circle of the
machine is large.
Tilt-Steering Pedal
G019903
To tilt the steering wheel toward you, press the foot pedal
(Figure 10) down, pull the steering tower toward you to the
most comfortable position, and release the pedal.
Motion Pedals
The foot-operated motion pedals
either side of the base of the steering wheel, control the
motion of the drive roller. The pedals are connected so that
they cannot both be pressed down at the same time, you can
press only 1 pedal at a time. If you press down the right pedal,
the machine moves to the right, and if you press down the left
15
(Figure 12), pull back on the
Figure 12
2. Parking brake—engaged
(Figure 10) clockwise to turn the
(Figure 10), located to