Specifications; Attachments/Accessories; Operation; Think Safety First - Toro GreensPro 1260 Operator's Manual

Throttle Lever
The throttle lever (Figure
control; it controls the speed of the engine and therefore
controls the speed of the machine. For best rolling
performance, set this control to the
Fuel-Shutoff Valve
The fuel-shutoff valve (Figure
choke lever. Move it to the open position before attempting
to start the engine. Once you have finished using the machine
and you have turned the engine off, move the fuel-shutoff
valve to the position.
CLOSED
Recoil-Start Handle
To start the engine, pull the recoil-start handle
quickly to turn the engine over. The controls on the engine
described above must all be set correctly for the engine to
start.
Oil-Level Switch
The oil-level switch is located inside the engine; it prevents
the engine from running if the oil level falls below the safe
operating limit.

Specifications

Weight
308 kg (679 lb)
Length 136 cm (53.5 inches)
Width 122 cm (48.0 inches)
Height 107 cm (42.2 inches)
Maximum speed 12.8 km/h (8 mph) @ 3600 rpm

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro genuine
parts. When it comes to reliability, Toro delivers replacement
parts designed to the exact engineering specification of our
equipment. For peace of mind, insist on Toro genuine parts.
15) is located next to the choke
position.
FAST
15) is located underneath the
(Figure

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Think Safety First

Carefully read all safety instructions and symbols in the
safety section. Knowing this information could help you or
bystanders avoid injury.
DANGER
Operating on wet grass or steep slopes can cause
sliding and loss of control.
Wheels dropping over edges can cause rollovers,
11)
which may result in serious injury, death, or
drowning.
There is no rollover protection.
To avoid loss of control and possibility of rollover:
• Do not operate near drop-offs or near water.
• Do not operate on steep slopes.
• Reduce speed and use extreme caution on
slopes.
• Avoid rapid speed changes.
CAUTION
This machine produces sound levels that can cause
hearing loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
The use of protective equipment for eyes, ears, hands, feet,
and head is recommended.
1
1. Wear eye protection.

Preparing to Use the Machine

1. Clear any debris from above and underneath the
machine.
2. Ensure that all scheduled maintenance has been
completed.
17
G009027
Figure 16
2. Wear hearing protection.
2