Toro Safety; Safety And Instructional Decals - Toro GreensPro 1260 Operator's Manual

Toro Safety

The following list contains safety information specific to Toro
products or other safety information that you must know that
is not included in the CE, ISO, or ANSI standard.
Always follow all safety instructions to avoid serious injury
or death.
Use of this product for purposes other than the intended use
could prove dangerous to user and bystanders.
•
The direction on the machine (right or left) is determined
from the seated operator's position.
•
Know how to shut off the engine quickly.
•
Wearing safety shoes and long pants is advisable and
required by some local ordinances and insurance
regulations.
•
Handle fuel carefully. Wipe up any spills.
•
Using the machine demands attention. To prevent loss
of control:
– Do not drive close to sand traps, ditches, creeks, or
other hazards.
– Reduce speed when making turns. Avoid sudden
stops and starts.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or missing.
1. Hydraulic fluid
2. Read the Operator's Manual.
1. Read the Operator's Manual.
93-6686
104-7049
•
Do not touch the engine, muffler, or exhaust pipe while
the engine is running or soon after it has shut off, because
these areas could be hot enough to cause burns.
•
When a person or pet appears unexpectedly in or near the
work area, stop operation.
Maintenance and Storage
•
Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
•
If you must run the engine to perform a maintenance
adjustment, keep your hands, feet, clothing, and any parts
of the body away from the rollers, attachments, and any
moving parts. Keep everyone away.
•
To ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer. The maximum-governed engine speed
should be 3,600 rpm.
•
If the machine ever needs major repairs or if you desire
assistance, contact an Authorized Toro Distributor.
•
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
1. Traction pedal, push to move left.
1. Traction pedal, push to move right.
6
111-5649
111-5650