Motorola KEY 3000 User Manual page 86

KVL 3000 User's Guide
Zeroizing Keys in
Target Devices
(continued)
4-24
4. Use the key to select LOAD. The
following screen will appear:
TRAF ZEROIZE
LOAD TO 0
5. Use the or
desired key location (slot) in the target
device you wish to zeroize (or use the
keypad to directly enter the location
number).
6. Use the key to select XFER. The
KVL 3000 will perform the load" process
and erase the encryption key stored in the
selected slot in the target device. When
finished, the display will show KEY LOAD
SUCCESSFUL.
Zeroizing Shadow Keys in Target Devices
1. Connect the KVL 3000 to the target device
using the appropriate cable. Turn both
units on.
2. Use the key to select SHAD from the
Main Menu. The following screen will appear:
SHAD>0
ALGO DES
LID xxxx
EDIT
continued on next page
XFER
keys to select the
LOAD
ASN Operation