Motorola KEY 3000 User Manual page 224

Setting Up
KVL 3000 for KMF
Operation
(continued)
ASTRO 25 Operation
Chapter 7 Using KVL 3000 in OTAR Systems
3. Press the key to select EDIT. A
warning screen will appear notifying you
that editing the KMFRSI will destroy any
Store and Forward messages and target
status updates that may be stored in the
KVL 3000. Select Abort to exit Edit mode,
or select OK to enter/edit the KMFRSI
number. The following screen will appear.
KMFRSI:
J
4. Enter the desired KMFRSI number (7
digits maximum; entry of leading zeroes
not required) and then press the Enter
key to accept the entry.
z End of This Procedure z
7-13