Perform Initial
Programming
(continued)
ASN Operation
Chapter 3 Performing Initial Programming
System Dependent Parameters
(continued)
Select Modem Baud Rate (OTAR Only)
When using a direct (cable) or modem
connection to communicate with the KMC, the
baud rate of the KMC must be selected. Select
this baud rate as follows:
1.
Navigate to the CONFIG menu, then
navigate to and select BAUDR. The
following screen will appear:
BAUD RATE
IS 9600
EDIT
2.
Press
to select EDIT. The following
screen will display.
Use the
or
desired baud rate (choices are 2400,
4800, 9600, 19200, and 57600).
BAUD RATE
>9600
3.
Press
to select ACCEPT.
keys to select the
ACCEPT
3-17