Motorola KEY 3000 User Manual page 73

Loading Traffic
Keys (continued)
ASN Operation
Chapter 4 Entering and Loading Keys
Loading Traffic Keys
(ASTRO Single Key Target Radio)
In this procedure, a single key is loaded to the
microprocessor in an ASTRO target radio.
1. Turn on the KVL 3000 and the target radio,
then connect them using the appropriate
cable.
2. Use the key to select TRAF from the
Main Menu. The following screen will
appear:
TRAF>0
ALGO DES
LID xxxx
EDIT
3. Use the or
traffic key you wish to load to the target
radio (or use the keypad to directly enter
the location number).
4. Use the key to select LOAD. The
following screen will appear while the key
is being loaded.
LOADING KEY
0000 TO XXXX
continued on next page
LOAD
keys to select the
4-11