Copying Keys From A Kmf To A Kmc - Motorola KEY 3000 User Manual

Copying Keys
from a KMF to a
KMC
Chapter 1 Using the Key Porting Feature
Overview
Copying existing keys from a KMF and loading
them into a KMC involves the following three
major steps:
D Connect the KVL 3000 to the KMF and
load the desired keys from the KMF into
the KVL 3000 memory
D Port the keys (which are in ASTRO 25
format) to ASN format within the KVL 3000
memory
D Connect the KVL 3000 to the KMC and
load the keys into the KMC

Load the Keys from KMF into KVL 3000
1. Make sure the KVL 3000 is in ASTRO 25
mode (as described in
Between ASN and ASTRO 25 Operation
behind the MIGRATION tab), and that
KMF mode is enabled (navigate to KMF
within the CONFIG menu and select ON).
2. Connect the KVL 3000 to the KMF and
download the desired keys (as described
in Chapter 6 Using KVL 3000 in OTAR
Systems behind
OPERATION tab).
 Port the Keys from ASTRO 25 to ASN
Since the keys were loaded from a KMF, they are
in ASTRO 25 format (i.e., stored according to
CKRs and containing KIDs). Before loading the
keys into the KMC, you must first port the keys
to ASN format. To do this, perform the
procedures beginning on page 1-8 of this
chapter.
Switching
the ASTRO 25
1-13