Motorola KEY 3000 User Manual page 105

Loading Keys
from KVL 3000 to
KMC
ASN Operation
Chapter 6 Using KVL 3000 in OTAR Systems
In this procedure, encryption keys that have
been entered and stored in the KVL 3000 are
transferred to the KMC one at a time. This
scenario requires that the KVL 3000 be
connected directly to the KMC via a key load
cable.
1. Request that the KMC operator set up the
KMC to receive a key load from a KVL.
2. Connect the KVL 3000 to the key load port
on the KMC front panel using a standard
key load cable (TKN8229A)
3. Use the key to select TRAF (or
SHAD, depending on the type of key the
KMC is setup to accept) from the Main
Menu. The following screen will appear
(Traffic Key shown):
TRAF>0
ALGO DES
LID xxxx
EDIT
4. Use the or
desired key location for the traffic key you
wish to load to the KMC (or use the
keypad to directly enter the location
number).
continued on next page
LOAD
keys to select the
6-5