Motorola KEY 3000 User Manual page 42

KVL 3000 User's Guide
Perform Initial
Programming
(continued)
3-6
3. Use the or keys to select the
desired algorithm. Then use the
to select ON/OFF to turn the algorithm off.
Note You can not turn off the default
algorithm. Also, you can not turn off the
algorithm in a single algorithm KVL 3000,
or if the other algorithm (dual algorithm
KVL 3000s) is turned off.
To make an algorithm the default
For dual algorithm KVL 3000s, one of the two
algorithms will be set to default. This is the
algorithm that is automatically selected when
entering keys, saving you the inconvenience
of having to select between the two algorithms
if all or many of your keys use the same
algorithm. To switch the default to the other
algorithm, perform the following steps.
Note On single algorithm KVL 3000s, the
single algorithm is always the default and can
not be changed or turned off.
1. Navigate to the CONFIG menu, then
navigate to and select ALGO. The
following screen will appear:
DEFAULT ALGO
IS DES
PROMPT ON
SETUP
continued on next page
key
PROMPT
ASN Operation