Motorola KEY 3000 User Manual page 55

Perform Initial
Programming
(continued)
ASN Operation
Chapter 3 Performing Initial Programming
System Dependent Parameters
(continued)
Turn FIPS On/Off When turned on, FIPS
operation causes the KVL 3000 to operate in a
mode that is compliant with the U.S. Federal
Information Processing Standard (FIPS) 140 1
guidelines. This mode of operation enforces the
use of passwords and activates tamper
protection. If tampered with (e.g., back cover
removed), if the main battery is dead, if the main
battery is removed while the KVL 3000 is on, or
if the main battery is removed for an extended
period of time (i.e., several minutes), all
previously entered keys will be erased. With
FIPS operation turned off, all previously entered
keys will not be erased if the aforementioned
conditions occur. Turn FIPS operation on as
follows:
1. Navigate to the CONFIG menu, then
navigate to and select FIPS. The
following screen will appear:
FIPS
IS OFF
OFF
2. Press to select ON.
ON
3-19