Motorola KEY 3000 User Manual page 262

User Entry Errors
Error/Status
Message
Probable Cause(s):
CANNOT ENTER
SAME KID FOR
THIS ALGO!!
Remedy(s):
Probable Cause(s):
CANNOT PORT!
KID EXISTS
FOR ALGO IN
ASN!
Remedy(s):
Probable Cause(s):
INVALID KEY
ENTERED!!!
Remedy(s):
Probable Cause(s):
INVALID PID!
Remedy(s):
CHECK ASN
SPLIT VALUE!
Probable Cause(s):
WRONG PARITY
ENTERED!
Remedy(s):
ASTRO 25 Operation
Chapter 9 Troubleshooting
Probable Cause and Remedy
1) You have attempted to enter a
key into the KVL 3000 with a KID that
is already assigned to an existing
key of the same algorithm type.
1) Select a unique KID for the new
key being entered.
1) You have attempted to port an
ASTRO 25 key to ASN and a TEK of
the same algo type and KID already
exists in ASN.
1) Delete the ASN key that has the
same KID.
1) You have entered a key that is
considered to be invalid after
KVL 3000 performs internal encryp
tion tests on key.
1) Enter a different key.
1) You have attempted to port an
ASTRO 25 key to an invalid PID loca
tion in ASN (e.g., a TEK key must be
ported to the ASN memory partition
assigned to Traffic Keys).
1) Verify the split value (assigned
via CONFIG menu in ASN opera
tion) that divides the memory be
tween Traffic and Shadow keys.
TEKs must be ported to Traffic Key
PIDs, KEKs must be ported to Shad
ow Key PIDs).
1) DES key entered into KVL 3000
has incorrect parity (odd parity is re
quired per byte for DES keys).
1) Make sure key to be entered is
correct and has odd parity, then re
enter the key
9-3