Xilinx KC705 User Manual page 48

Chapter 1: KC705 Evaluation Board Features
•
•
•
User GPIO LEDs
[Figure
Figure 1-25
X-Ref Target - Figure 1-25
GPIO_LED_0
GPIO_LED_1
GPIO_LED_2
GPIO_LED_3
GPIO_LED_4
GPIO_LED_5
GPIO_LED_6
GPIO_LED_7
48
User Rotary Switch (callout 25, hidden beneath the LCD)
• ROTARY_PUSH, ROTARY_INCA, ROTARY_INCB: SW8
User SMA (callout 26)
• USER_SMA_GPIO_P, USER_SMA_GPIO_N: J13, J14
2 line x 16 character LCD Character Display (callout 19)
• If the display is unmounted, connector J31 pins are available as 7 independent 5V
GPIOs
1-2, callout 34]
shows the user LED circuits.
DS27 DS26 DS25
R442 R441 R440
49.9Ω 49.9Ω 49.9Ω
1% 1% 1%
GND
Figure 1-25: User LEDs
www.xilinx.com
DS3 DS2 DS10
R97 R96 R95
49.9Ω 49.9Ω 49.9Ω
1% 1% 1%
DS1 DS4
R94 R93
49.9Ω 49.9Ω
1% 1%
UG810_c1_23_072511
KC705 Evaluation Board
UG810 (v1.3) May 10, 2013