2
Installing the Discharge Chute
Parts needed for this procedure:
1
Bolt (1/4–20 X 1–1/2 inches)
1
Locknut (1/4–20 inch)
3
Carriage bolt (1/4–20 x 1 inch)
3
Locknut (1/4–20 inch)
1
Screw (1/4–20 X 5/8 inch)
Procedure
1. Insert the chute post through the bracket into the base
of the machine and secure it using a bolt and a locknut
(Figure
5).
1. Chute post
2. Bolt (1/4–20 X 1–1/2
inches)
2. Assemble the chute rod and secure the cables
6).
Figure 5
3. Locknut (1/4–20 inch)
4. Bracket
(Figure
6
Figure 6