Installing The Discharge Chute - Toro 36002 Operator's Manual

2

Installing the Discharge Chute

Parts needed for this procedure:
1 Bolt (1/4–20 X 1–1/2 inch)
1 Lock nut (1/4–20 inch)
3 Carriage bolt (1/4–20 x 1 inch)
3
Lock nut (1/4–20 inch)
1 Screw (1/4–20 X 5/8 inch)
Procedure
1. Insert the chute post through the bracket into the base
of the machine and secure it using a bolt and a lock
nut (Figure 4).
1. Chute post
2. Bolt (1/4–20 X 1–1/2 inch)
2. Assemble the chute rod and secure the cables
5).
Figure 4
3. Lock nut (1/4–20 inch)
4. Bracket
1. Chute rod
2. Carriage bolt (1/4–20 x 1
inch)
3. Lock nut (1/4–20 inch)
(Figure
5
Figure 5
4. Cable clip
5. Screw (1/4–20 X 5/8 inch)