Setup; Unfolding The Handle - Toro SnowMaster 724 QXE Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
1

Unfolding the Handle

No Parts Required
Procedure
Important: Ensure that the cables are not pinched
when unfolding the handle.
Description
No parts required
Bolt (1/4–20 X 1–1/2 inches)
Locknut (1/4–20 inch)
Carriage bolt (1/4–20 x 1 inch)
Locknut (1/4–20 inch)
Screw (1/4–20 X 5/8 inch)
No parts required
Figure 4
Qty.
–
Unfold the handle.
1
1
3 Install the discharge chute.
3
1
–
Check the engine-oil level.
5
Use