Using The Do-Not-Disturb Function - Huawei TE20 Administrator's Manual

TE20 Videoconferencing Endpoint
Administrator Guide
Prerequisites
This parameter is available only after Answer mode is set to Auto. For details about how to
set the answering mode, see 4.5 Setting the Answering Mode.
Background
If this function is enabled, the endpoint automatically mutes all the sound (such as
microphone input) after being called to join a conference. Remote sites cannot hear the local
sound.
Procedure
Step 1 Choose System Settings > Conference and click the General Settings tab.
Step 2 Set Mute local audio for answered calls to Enable or Disable.
----End

4.7 Using the Do-Not-Disturb Function

If you do not want to be disturbed by incoming calls, you can enable the Do-not-disturb
function.
Step 1 On the endpoint web interface, choose Conference > Do Not Disturb.
The Do Not Disturb dialog box is displayed.
Step 2 Select Enable for Do Not Disturb and click OK.
----End
Issue 01 (2016-09-01)
To disable the DND function, set Do Not Disturb to Disable, and click OK.
After an endpoint power-off, settings will not be saved, and will be restored to defaults.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Conference Operations Using the Web Interface
51