Huawei TE20 Administrator's Manual page 45

TE20 Videoconferencing Endpoint
Administrator Guide
Table 4-2 Parameter description
Parameter
Register
with server
Server
address
Conference
service
number
Proxy server
Proxy server
address
Site number
Issue 01 (2016-09-01)
Description
Specifies whether your endpoint registers
with an IMS server.
Only endpoints that have registered with
IMS servers can join the IMS network.
An endpoint that registers with an IMS
server can place calls to remote sites
using their IP addresses or site numbers
if the remote sites also register with IMS
servers.
NOTE
If Register with server is set to Enable, you
need to set Server address, Conference
service number, Site number, User name,
and Password.
Specifies the IP address or domain name
of the IMS server with which you want
the endpoint to register.
If you set this parameter to the domain
name of the IMS server, enable the
domain name server (DNS). If the DNS
is not enabled, set Proxy server to
Enable to enable it.
Specifies the conference service number
for your endpoint to initiate conferences
over an IP multimedia subsystem (IMS)
network.
Set this parameter to the conference
service number obtained from the IMS
network administrator.
Specifies whether to enable the proxy
server.
You must enable the proxy server when
using the IMS network.
Specifies the address of the proxy server.
If you set Server address to the IMS
server domain name, set this parameter
to the IP address bound to that domain
name.
Specifies the site number for your
endpoint.
If your endpoint registers with an IMS
server, endpoints that also register with
the IMS server can dial this site number
to call your endpoint.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Conference Operations Using the Web Interface
Setting
Set this parameter to Enable.
IP address example:
192.168.1.10
Domain name example:
huawei.com
It is recommended that you set
Server address to the domain
name of the IMS server with
which you want the endpoint to
register.
Leave this parameter empty.
Set this parameter to Enable.
Example: 192.168.1.12.
Example:
+8675584221069@huawei.co
m
No default value is set for this
parameter.
The value can contain digits,
37