Huawei TE20 Administrator's Manual page 46

TE20 Videoconferencing Endpoint
Administrator Guide
Parameter
User name
Password
Server type
Transmissio
n type
SSL version
BFCP
Transmissio
n type
Issue 01 (2016-09-01)
Description
Specify the user name and password that
your endpoint uses to register with the
IMS server.
The password you set here must be the
same as that set on the IMS server
beforehand.
Specifies the SIP server type.
 Standard: Select this option if your
endpoint registers with other SIP
servers.
 CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).
Specifies the protocol used for SIP
signaling transmission.
 TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
 UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.

TLS: Use Transport Layer Security
(TLS) to implement transmission
security. With this option selected, a
root certificate must be imported
when your endpoint registers with a
SIP server. For details, see 10.2.10
Managing Certificates. The call rate
may be compromised if this option is
selected.
Specifies the encryption protocol used by
SIP calls. The value can be TLS 1.0 or
TLS 1.1.
NOTE
This parameter is available only after
Transmission type is set to TLS.
Specifies the protocol used for BFCP
signaling transmission.
 Auto: Automatically select a protocol
based on the BFCP tranmission type
supported by the remote site.
 TCP: Use the Transmission Control
Protocol (TCP) to implement
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Conference Operations Using the Web Interface
Setting
letters, and special characters,
such as @ # %.
User name example:
+8675584221069@huawei.co
m
Obtain the value of this
parameter from the IMS server
administrator.
Set this parameter to Standard.
Set this parameter to UDP.
The IMS network only supports
UDP transmission.
The default value is TLS 1.1.
The default value is UDP.
38