Ending A Conference; Enabling The Do Not Disturb Function - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
Follow-up Procedure
To stop presentation sharing, click Stop.
To disconnect the air content sharing client from the endpoint, click Disconnect.

7.10 Ending a Conference

If a conference ends early, you can use the End Conference function to end the conference in
advance.
To end a conference, select End Conference on the Conference Control screen or press
on the remote control.

7.11 Enabling the Do Not Disturb Function

If you do not want to be disturbed by incoming calls, you can enable the Do Not Disturb function.
This function prevents users from being disturbed by incoming calls. If this function is enabled,
common users can enable or disable the do-not-disturb function under Advanced Settings >
Utilities.
Issue 02 (2014-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Experiencing a Conference
34