Installing Waterproof Components - Huawei Airbridge BTS3606 Installation Manual

Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) NESP (2) E1/T1 cable (3) Baffle at cable access area
(4) Waterproof module
Figure 5-18 Routing E1/T1 cables
5) Position the cables and bundle them onto the cabling rack in the cabinet.

5.4.2 Installing Waterproof Components

You must waterproof E1/T1 cables using waterproof components. This section
introduces the composition and installation tools and principles of waterproof
components.
I. Introduction to Waterproof Components
Waterproof components consist of the following parts:
1) Frame
The frame is already installed at the bottom of the BTS3606A cabinet.
2) Sealing module
Sealing modules are made of blue rubber and used to separate cables. There are
two types of sealing modules: common sealing module and filler module.
Common sealing module
Figure 5-19 is the cross-sectional view of half a common sealing module.
Huawei Technologies Proprietary
5-20
Chapter 5 Installing Cables