Table of Contents
Advertisement
Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
2)
Remove the screws on the GPS lightning arrester.
3)
Place the lightning arrester against the groove in the air intake box and fasten it
using screws as shown in Figure 5-35.
(1) GPS lightning arrester (2) Screw that comes with the lightning arrester
(3) N-type connector
Figure 5-35 Installing GPS lightning arrester (1)
4)
Connect the N-type connector of the internal GPS clock cable to the GPS lightning
arrester as shown in Figure 5-35.
5)
Lead the external GPS clock cable from the sealing module (see Figure 5-17 for
the position of the inlet).
6)
Route the cable along the column in the middle of the cabinet to the gap under the
air intake box.
7)
Connect the external GPS clock cable to the other end of the GPS lightning
arrester, as shown in Figure 5-36.
Figure 5-36 Installing GPS lightning arrester (2)
Huawei Technologies Proprietary
5-34
Chapter 5 Installing Cables
- Quick Links:
- Table 1-1 Technical Documents
Hide quick links:
Advertisement
Table of Contents
