Huawei Airbridge BTS3606 Installation Manual page 108

Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) M3 screw
Figure 5-30 Removing the shielding clip
2) Lead the E1/T1 cable through the waterproof module and press the waterproof
module tightly against others by referring to section 5.4.2 "Installing Waterproof
Components".
3) Inside the cabinet, peel off a small part of the outer skin of the E1/T1 cable above
the waterproof module to expose the shielding layer, as shown in Figure 5-31.
(1) Shielding clip
Figure 5-31 Peeling off the outer skin of the E1 cable
(2) Shielding clip (3) Waterproof module
(1) (2)
(2) Shielding layer of the E1 cable
Huawei Technologies Proprietary
5-30
Chapter 5 Installing Cables
(3)
(3) Waterproof module