Yamaha AN1x Owner's Manual page 77

V O I CE CO M M O N
This menu includes parameters co mmo n to the vo ice (bo th
Scenes) including T empo fo r Arpeg g iato r and Step
Sequencer, plus Effect-related setting s and vo ice naming
parameters. The Vari EF Dry:W et parameter can be edited
fo r each Scene.
Vari EF/ EQ Vari EF
Tempo Split Pnt Param Data Dry:Wet
Te m po
The T empo setting determines the tempo fo r the AN 1 x's
internal clo ck in beats per minute (BPM), between a
rang e o f 4 0 and 2 4 0 BPM. The T empo setting co ntro ls
bo th Arpeg g iato r and Step Sequencer play.
Settings:
MIDI, 4 0 ~ 2 4 0
When Tempo is set to " MIDI" , the AN1 x's clock can be controlled by the clock of
an external MIDI device such as a music sequencer, connected to the MIDI [ IN]
terminal.
When the Free EG Length parameter is set to " bar" , the Free EG sequence will be
synchronized with the Tempo set here. For more information, see page 8 2 .
Dly / Rev EF EF Name VOICE
Param Data Bypass Cursor Char COMMON
Split Pnt
(Split Point)
The Split Po int setting determines the no te at which the
keybo ard divides into lo wer (Scene 1 ) and upper
(Scene 2 ) zo nes fo r Split mo de play (SPL IT/ SPL IT
UN ISO N mo de). It also determines the divisio n fo r the
Arpeg g iato r o r Step Sequencer depending o n
Keybo ard Mo de setting .
For information about Split modes, see page 2 3 .
Settings:
C-2 ~ G 8
Va ri EF/ EQ
Variatio n Effect/ Equalizer setting s determine the
Variatio n Effect type and data setting s, as well as EQ
data setting s, fo r the vo ice. There are three parameters,
including Param (Parameter), Data, and Variatio n Effect
Dry:W et.
The signal enters the Effect block from the VCA output, and passes to the
Variation Effect and Equalizer in a serial connection. For more information, see
page 1 1 . Also see the separate Dat List book.
Pa r a m
(Pa ra m eter)
The Parameter setting determines the Variatio n Effect
type and select parameters o f the selected effect as
well as the EQ .
77
(Va ria tion Effect/ Equa lizer)