Counter; Display Instructions - Mitsubishi Electric MELSEC Q Series Handbook

7
REPLACEMENT OF PROGRAM
(b) AnSCPU timer ladder programming method
Set the total number of points of timer, and the first device number of low-speed timer, high-speed
timer and retentive timer in the Device setting of the parameter setting.
The default setting is as follows:
Number of points of timer: 256
First device number of low-speed timer: 0 (T0 to T199)
First device number of high-speed timer: 200 (T200 to T255)
First device number of retentive timer: 0
When using the retentive timer, change the setting to reserve necessary number of points.

7.7.5 Counter

Function
Specifying method
Updating present value
On/off processing for contact

7.7.6 Display instructions

Instruction
PR
Not applicable for the Universal
model QCPU.
Consider using a display unit or
touch panel.
PRC
7
- 39
QnUCPU/QnASCPU
K100
C0
• When executing the OUT Cn instruction
QnUCPU
• With SM701 off: Outputs
characters before 00
• With SM701 on: Outputs 16
characters.
• With SM701 off: Outputs
comments in 32 characters.
• With SM701 on: Outputs first 16
characters of comment.
AnSCPU
AnUS(H)CPU
A2ASCPU
• When executing the END instruction
QnASCPU AnUS(H)CPU
A2ASCPU
• With M9049 off: Outputs
. characters before 00
H
• With M9049 on: Outputs 16
characters.
• Outputs comment in 16
characters.
AnS(J)HCPU
K100
C0
AnSCPU
AnS(J)HCPU
.
H