Mitsubishi Electric MELSEC Q Series Handbook page 193

7
REPLACEMENT OF PROGRAM
(b) Specify the target programmable controller type in the "Change PLC type" dialog box.
Click the [OK] button after setting the PLC type.
(c) Select the conversion method of special relays/registers.
Specify the conversion destination of special relays/registers (AnS series CPU:M9000s/D9000s).
Check the [Convert M9000/D9000  Q/L/QnACPU special devices]
• Checked: Converted to the Q dedicated device.
• Not Checked: Converted to the A compatible (SM1000s/SD1000s).
Fixed to "Checked" when selecting the Universal model QCPU.
It is recommended to check the box when specifying the device conversion destination.
Click the [Yes] or [Confirm change] button after specifying the device conversion destination to start
"Change PLC type".
• [Yes] : The change is executed without intermediate steps of user confirmation.
• [Confirm change]: Asks the user for confirming the changes.
*1 When changing from the QnAS series to the Q series, the conversion method of the special relay and special register
cannot be selected.
(The Change PLC type screen above does not display the message to specify devices to be converted.)
PLC series setting
PLC type setting
*1
7
- 6