Changing Programmable Controller Type - Mitsubishi Electric MELSEC Q Series Handbook

7
REPLACEMENT OF PROGRAM

7.1.2 Changing programmable controller type

"Change PLC type" is a function for changing existing data to data for other programmable controller
series for reuse. This function changes the target programmable controller type of the data that is read
to GX Developer.
Some instructions that cannot be automatically converted are changed to "OUT SM1255".
Search for these instructions or SM1255 in the converted program and modify the program manually.
For intelligent function modules and network modules, review programs and parameters.
(1) Applicable range of conversion from AnS/QnASCPU by the GX Developer
The following table shows the applicable range of conversion from the AnS/QnASCPU to other CPU.
Product
GX Developer
*1 Changing of "PLC type" from the existing CPU module to the High-speed Universal model QCPU is not supported in GX
Developer.
(2) Operation of GX Developer
(a) Select "Change PLC type" of the "Project" menu.
7
- 5
Change source
AnS/QnASCPU
Change destination
A/AnSCPU QnA/QnASCPU
 
QCPU
*1