Chapter 4 Replacement Of Power Supply Module; List Of Alternative Models Of Power Supply Module - Mitsubishi Electric MELSEC Q Series Handbook

4
REPLACEMENT OF POWER SUPPLY MODULE
4

4.1 List of Alternative Models of Power Supply Module

AnS/QnAS series model
Product
Power supply module
*1 The Q61SP may be used when only a few modules are replaced, and connection of an extension base is unnecessary.
The output current capacity is limited, please confirm the total current consumption of the system.
Point
For details of replacing power supply modules when using A/QnS extension base unit, please refer to
the following manual.
Transition from MELSEC-A/QnA (Large Type) Series to Q Series Handbook (Fundamentals)
L08043ENG
REPLACEMENT OF POWER SUPPLY
4
MODULE
Model
Q61P
A1S61PN
Q61SP
A1S62PN Q62P
A1S63P Q63P
Q00UJCPU(-S8)
A1SJHCPU(-S3/8)
(power supply
(power supply part)
part)
Q series alternative model
Model Remarks (restrictions)
1) Change in external wiring: required
2) Change in slots: not required
3) Change in specifications:
required (current capacity: 5A 6A)
1) Change in external wiring: required
2) Change in slots:
can be used with the slim type main base unit
*1
(Q3SB) only.
3) Change in specifications:
required (current capacity: 5A 2A)
1) Change in external wiring: required
2) Change in slots: not required
3) Change in specifications: not required
1) Change in external wiring: required
2) Change in slots: not required
3) Change in specifications:
required (current capacity: 5A 6A).
1) Change in external wiring: required
2) Change in slots:
not required (Main base unit, CPU module, and
power supply module are integrated.)
3) Change in specifications:
required (The input power supply is switched
between 100 and 120V or 200 and 240V.
(In-between voltage cannot be applied.))
 wide range applicable to 100 to 240V
4
- 1