NEC SL1000 Features And Specifications Manual page 60

SL1000
Guide to Feature Programming
Program Number
25-06-01
11-10-20
20-17-01
22-02-01
25-02-01
B
Operation
Set up Built-in Auto-Answering and Sinple Voice Mail
< Program>
PRG22-02-01: 1 (VRS)
PRG25-02-01: Talkie type: 1 (VRS), Additional data: Message No. 1
PRG25-06-01: Message No.1: 106 (record to VRS) Received dial 1
To record VRS prompt message 1
1. Press Speaker+716+7+001 at terminal
2. After Beep tone, record your message.
3. Press Speaker and finish recording.
Incoming call and record calling party message
1. Incoming call to specified trunk
2. Calling party is connected to built-in VRS, and hears auto-answering message 1.
3. Calling party dials 1.
4. Calling party records the message (max 2 minutes) after beep tone.
5. Finish the recording.
6. Then following notification will be indicated at operator multiline terminal LCD.
To retrieve recorded message
1. Press Speaker+716+5+message number (091~100) at terminal.
2. Recorded message is played.
To delete recorded message
1. Press Speaker+716+3+message number (091~100) at terminal.
2. Recorded message is deleted.
1-52
Program Name
Next Attendant message number
VRS-Record / Erase message
Operator's Extension number
Incoming Service Type Setup
DID/DISA VRS Message
xx indicates number of recorded messages
(01 10)
ISSUE 1.0
Default
0
716
No setting
0
1
Built-in Auto-Answering