NEC SL1000 Features And Specifications Manual page 332

SL1000
Related Features
Automatic Route Selection (ARS) / Central Office Calls, Answering / Central Office Calls,
Placing
Program incoming and outgoing access and routing options.
Off Hook Signaling
If enabled, a user hears Call Waiting beeps if additional calls are waiting behind a loop key.
Programmable Function Keys
L
If you have a line and loop key for the same trunk, the line key has precedence. An incoming call rings
the line key, not the loop key. When you press the loop key for an outgoing call, the line key lights.
Ring Groups
Trunks ring terminals according to their Ring Group assignments (Programs 22-04 and 22-05).
Direct Inward Dialing (DID) / Direct Inward Line (DIL) / Direct Inward System Access (DISA)
Transferred DID, DIL and DISA calls do not require ring group programming.
Guide to Feature Programming
Program
Number
14-05-01
14-07-01
15-06-01
15-07-01
15-13-01
15-13-02
20-07-10
22-04-01
22-05-01
Operation
To place a call on a loop key:
1. Press outgoing or both ways loop key.
You hear dial tone and the key lights green.
1-324
Program Name
Trunk Group - Trunk Group Number
Trunk Access Map Setup
Trunk Access Map for Extensions
Programmable Function Keys
Loop Keys - Outgoing Option
Loop Keys - Incoming Option
Class of Service Options (Adminis-
trator Level) - Programmable Function
Key Programming (Appearance Level)
Incoming Extension Ring Group
Assignment
Incoming Trunk Ring Group Assign-
ment
Default
Trunk Port 1~126 = Priority 1~126
Access Map 1 = Trunk Ports 1~126 assigned
with option 7 access (incoming and outgoing
access and access when trunk is on Hold).
Access Map 2~126 = Trunk Ports 1~126
assigned with option 0 access (No access).
1
Refer to Programming Manual.
0: Programming Function Key No. = 01-24
0: Programming Function Key No. = 01-24
COS 01~15 = 1
Extension 200 (first port)
1
ISSUE 1.0
Note
Loop Keys