Programming From A Multiline Terminal - NEC SL1000 Features And Specifications Manual

SL1000

Programming from a Multiline Terminal

Description
System Programming can be performed from any display multiline terminal. Most programming
changes become effective immediately. Other programming changes become effective after the data is
backed up from temporary memory to permanent memory.
Conditions
• Up to two telephones can be in programming mode anytime.
• A maximum of four users can be logged into WebPro anytime.
P
• Four WebPro users and two phone programming users can be logged in at the same time for a total
of six users in programming mode simultaneously. However, the two phone programming users do
not show up in session management in WebPro.
• PCPro can be logged in with only one user. This is allowed only if no other users are logged into pro-
gramming mode (PCPro, WebPro, or Phone). Also, if a user is connected to the switch via PCPro, no
other user can log in through PCPro, WebPro, or Phone Programming.
• Programming from a multiline terminal can require a password to enter programming.
Default Settings
Enabled
System Availability
Terminals
Multiline terminals with display
Required Component(s)
• 408M-A1
• 408E-A1
• 008E-A1
Required Software
None
Related Features
PC Programming
Guide to Feature Programming
Program
Number
90-02-01
90-02-02
1-414
P o r g a r m
Programming Password Setup - User Name
Programming Password Setup - Password
N a m e
Refer to Programming Manual.
Refer to Programming Manual.
Programming from a Multiline Terminal
ISSUE 1.0
D e a f u t l