Resident System Program - NEC SL1000 Features And Specifications Manual

SL1000
Description
When power is supplied to the system, the hardware configuration is scanned and Resident System
Program default values are assigned including terminal types (e.g. DSS Console). This enables imme-
diate operation, even before the system is programmed to accommodate the individual site
requirements.
Conditions
• Default assignments for multiline terminals are: LK01~LK12 corresponds to CO01~CO12.
R
• DSS Console to Extension assignments for Attendant Add-On Consoles are not assigned.
• Default Attendant Add-On Console key assignments are:
DSS Keys = 001~060
Stations = 200~259
• First Initialization of the system returns all programming values to default. Press and hold the S1
(Load Switch) and press the Power switch. Continue to hold the S1 switch for approximately 5~10
seconds before releasing. The system boots loading Resident System Programming.
Default Settings
None
System Availability
Terminals
Not Applicable
Required Component(s)
None
Related Features
None
Guide to Feature Programming
None
Operation
None
1-424

Resident System Program

ISSUE 1.0
Resident System Program