NEC SL1000 Features And Specifications Manual page 500

SL1000
If Program 20-13-10 is set to 1, to manually disconnect the Conference, Forced Trunk Disconnect (i.e.,
Press the line key + 724 or the service code set of Forced Trunk Disconnect in Program 11-10-26) must be
used by an extension other than the originating extension.
Method B - Tandem Trunking with Transfer Key
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press Hold to place the first trunk call on hold.
3. Place a second trunk call.
4. Press Transfer.
This sets up an Unsupervised Conference with both outside parties.
T
The line keys for the trunks light solid red.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key + 724 or the service
code set of Forced Trunk Disconnect in Program 11-10-26) must be used by an extension other than the
originating extension.
Single Line Telephone
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press hookflash and dial 826 .
3. Place or answer second trunk call.
4. To set up the tandem call, press hookflash and dial #8.
5. Hang up.
This sets up a Conference between both outside parties.
Method C - Tandem Trunking on Hang up
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press Hold to place the first trunk call on hold.
3. Place a second trunk call.
4. Hang up.
This sets up an Unsupervised Conference with both outside parties.
The line keys for the trunks light solid red.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press line key + 724 or the service code
set of Forced Trunk Disconnect in Program 11-10-26).
Single Line Telephone
To set up a Tandem Call:
1-492 Tandem Trunking (Unsupervised Conference)
ISSUE 1.0