Table of Contents
Advertisement
Lenovo Moto Z4
Level 2 – Service and Repair Manual
Main PCB Removal
NOTE
The Main PCB can be recovered and
reused after removal.
1.
Use the Torx Driver and T3 Bit to remove
the 2 Machine Screws from the Main PCB
in the locations shown.
NOTE
After you remove the Machine Screws,
you cannot reuse them.
2.
Use the Thin Plastic Spudger to open the
ZIF Connector Door for the Side-Key Flex.
PAGE 54
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
- Quick Links:
- Exploded Views
Hide quick links:
Advertisement
Table of Contents
