Proximity Sensor Assembly - Lenovo Moto Z4 Service And Repair Manual

Lenovo Moto Z4
Level 2 – Service and Repair Manual

Proximity Sensor Assembly

Description
Stingray P Sensor OP1 FPCA,15.56x10.44mm
AU,SPKR,TBD,8OHM,BX,1.5W at 8OHM,800Hz,9
1. Use the Tweezers to remove the liner
from the Proximity Sensor.
2. Use the Tweezers to place the Proximity
Sensor onto the Top Carrier in the
location shown. Use care to align the
curve of the sensor with the curve in the
Top Carrier.
3. Slide a fingertip across the Proximity
Sensor to secure it to the Top Carrier.
PAGE 153
Reference #
10
11
Lenovo Confidential Restricted:
Do not share without consent from Lenovo