Lenovo Moto Z4 Service And Repair Manual page 44

Lenovo Moto Z4
Level 2 – Service and Repair Manual
Microphone Bracket Removal
NOTE
The Microphone Bracket can be
recovered and reused after removal.
1. Use the Torx Driver and T3 Bit to remove
the 2 Machine Screws from the
Microphone Bracket in the locations
shown.
NOTE
After you remove the Machine Screws,
you cannot reuse them.
2. Use the Tweezers to remove the
Microphone Bracket Heat Spreader from
the front of the Microphone Bracket.
NOTE
After you remove the Microphone
Bracket Heat Spreader, you cannot
reuse it.
3. Use the Thin Plastic Spudger to
disengage the snaps that hold the
Microphone Bracket to the Front Housing.
4. Use the Tweezers to remove the
Microphone Bracket from the Front
Housing.
PAGE 44
Lenovo Confidential Restricted:
Do not share without consent from Lenovo