Lenovo Moto Z4
Level 2 – Service and Repair Manual
Flash PCB Assembly
Description
Stingray FRU FLASH SUB Board
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
DICUT,FOAM,FROM,DIECUT_FOLES_RH_MAIN_CAM
1.
Use the Tweezers to remove the Flash
PCB Adhesive from the carrier.
2.
Use the Tweezers to place the Flash PCB
Adhesive into the pocket of the Front
Housing.
3.
Use the Tweezers to place the Flash PCB
into the pocket of the Front Housing.
PAGE 109
Reference #
4
5
26
Lenovo Confidential Restricted:
Do not share without consent from Lenovo