Lenovo Moto Z4 Service And Repair Manual page 150

Lenovo Moto Z4
Level 2 – Service and Repair Manual
4. Use the Torque Driver and the T3 Torx Bit
to tighten the 2 T3 Torx Machine Screws
to 1.0 ± 0.10 in-lb (0.11 ± 0.01 N∙m).
5. Use the Tweezers to remove the Headset
Jack Graphite Heat Spreader from the
carrier.
6. Use your fingers to place the Headset
Jack Graphite Heat Spreader over the
Headset Jack Grommet as shown.
7. Use the Tweezers to remove the
protective liner from the Headset Jack
Graphite Heat Spreader.
8. Use the Tweezers to remove the Audio
Bracket Graphite Heat Spreader from the
carrier.
PAGE 150
Lenovo Confidential Restricted:
Do not share without consent from Lenovo