Lenovo Moto Z4 Service And Repair Manual page 168

Lenovo Moto Z4
Level 2 – Service and Repair Manual
19. Verify the Display Flex ZIF Connector
Door on the Rear Housing is open.
20. Use the Tweezers to insert the Display
Flex into the ZIF Connector as shown.
Use the white line on the Flex as a guide
for insertion depth.
21. Slide a fingertip across the Display Flex
ZIF Connector Door to close it.
22. Use the Tweezers to place the Kapton
Tape over the Display Flex ZIF Connector
Door.
23. Place the Display into the Display Ledge
on the Front Housing.
24. Insert the phone into the Display Fixture
Press.
25. Insert the Display Fixture Press into the
Fixture Press as shown.
PAGE 168
Lenovo Confidential Restricted:
Do not share without consent from Lenovo