Lenovo Moto Z4 Service And Repair Manual page 116

Lenovo Moto Z4
Level 2 – Service and Repair Manual
Vibrator Foam Assembly
Description
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
VIBR,LIN,R4xH3.25,0.205KHz,Vibrator,R4xH
DICUT,FOAM,GSKT,DIECUT_FOLES_CABLE_GASKE
1. Use the Tweezers to remove the Vibrator
Foam from the carrier.
2. Use your fingers to place the Vibrator
Foam over the Vibrator as shown.
3. Press down for 5 seconds to secure the
Vibrator Foam to the Vibrator.
PAGE 116
Reference #
5
9
--
Lenovo Confidential Restricted:
Do not share without consent from Lenovo