Maintenance; Recycling And Disposal; Additional Documents - ABB TZIDC Manual

34 TZIDC DIGITAL POSITIONER | CI/TZIDC/ATEX/IECEX-EN REV. C

8 Maintenance

The positioner does not require any maintenance if it is used as
intended under normal operating conditions.
Note
Manipulation by users shall immediately render the warranty for
the device invalid.
To ensure fault-free operation, it is essential that the device is
supplied with instrument air that is free of oil, water, and dust.

9 Recycling and disposal

Note
Products that are marked with the adjacent symbol
may not be disposed of as unsorted municipal waste
(domestic waste).
They should be disposed of through separate
collection of electric and electronic devices.
This product and its packaging are manufactured from materials
that can be recycled by specialist recycling companies.
Bear the following points in mind when disposing of them:
• As of 8/15/2018, this product will be under the open
scope of the WEEE Directive 2012/19/EU and relevant
national laws (for example, ElektroG - Electrical
Equipment Act - in Germany).
• The product must be supplied to a specialist recycling
company. Do not use municipal waste collection points.
These may be used for privately used products only in
accordance with WEEE Directive 2012/19/EU.
• If there is no possibility to dispose of the old equipment
properly, our Service can take care of its pick-up and
disposal for a fee.
Trademarks
HART is a registered trademark of FieldComm Group, Austin, Texas, USA
Change from two to one column

10 Additional documents

Note
All documentation, declarations of conformity and certificates
are available in ABB's download area.
www.abb.com/positioners