Connection On The Device - ABB TZIDC Manual

TZIDC DIGITAL POSITIONER | CI/TZIDC/ATEX/IECEX-EN REV. C

Connection on the device

1 Cable gland
2 Blind plug
3 Terminals for option modules
Figure 20: Connection to device (example)
Change from one to two columns
2 tap holes ½- 14 NPT or M20 × 1.5 are provided on the left side
of the housing for cable entry in the housing. One of the tap
holes is fitted with a cable gland, while the other tap hole has a
blind plug.
Note
The connecting terminals are delivered closed and must be
unscrewed before inserting the wire.
1. Strip the wires to approximately 6 mm (0.24 in).
2. Connect the wires to the connecting terminals in line with the
connection diagram.
4 Terminal attachment kit for digital feedback
5 Terminals for basic unit
23