Selecting different BullsEye data
1
2
3
Application manual - BullsEye
3HAC050989-001 Revision: C
Action
To select a different data instance:
Select the device data argument in the BESetupToolJ instruction. Then tap Change
Selected in the Edit menu.
xx1400001221
A list of all available device data will be presented.
Select the devYokeDown instance and tap OK.
xx1400001222
The new device data is now added to the BESetupToolJ instruction. When the in-
struction is run, the parameters included in devYokeDown will be associated with
tWeldGun.
BESetupToolJ jtApprPos, jtStartPos, 15, tdMigDefault, scan-
BullsMig, devYokeDown, v100, fine, tWeldGun;
© Copyright 2004-2018 ABB. All rights reserved.
5 User guide
5.3.4 Selecting different BullsEye data
Continues on next page
Continued
39