Oil Level Sensor; Headlights - Pioneer 1200 Maintenance Service Manual

12
ELECTRICAL COMPONENTS: FE400 ENGINE
Ignition Coil Installation, Continued:
20. Install the muffler. See Muffler Installation, Section 15, Page 15-1.
21. Install the starter/generator and belt. See Starter/Generator Installation on page 12-9.
22. Connect the spark plug wire to the spark plug.
23. Connect the battery cables, positive (+) cable first, and tighten the terminals to 20 ft-lb (27.1 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).

OIL LEVEL SENSOR

See General Warning, Section 1, Page 1-1.
Testing the Oil Level Sensor
See Test Procedure 21, Section 11, Page 11-41.
Oil Level Sensor Removal
See Oil Level Sensor Removal, Section 13, Page 13-4.
Oil Level Sensor Installation
See Oil Level Sensor Installation, Section 13, Page 13-5.

HEADLIGHTS

See General Warning, Section 1, Page 1-1.
Testing the Headlight Bulb and Socket
See Test Procedure 30, Section 11, Page 11-46.
7
12
14
Figure 12-30 Headlight Assembly
Headlight Bulb Removal
1. Turn the key switch OFF and remove the key. Place the Forward/Reverse handle in NEUTRAL. Chock
the wheels.
2. Disconnect the battery cables as instructed (Figure 12-1, Page 12-1). See WARNING "To avoid unin-
tentionally starting..." in General Warning, Section 1, Page 1-2.
Page 12-26 2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
4
6
8
10
11
9
Oil Level Sensor