Chapter 8 Manufacturer Specific Control Object; Drive Recorder Status (Obj. 2C02H)]; [Drive Recorder Status (Obj. 2C02H: 00H)]; Clear Drive Recorder History (Obj. 2C03H)] - Mitsubishi Electric Melservo J5 Series User Manual

8
Manufacturer Specific Control Object
8.1

[Drive recorder status (Obj. 2C02h)]

[Drive recorder status (Obj. 2C02h: 00h)]

Data Type Access
U16 RO
Description
The enabled/disabled status of the drive recorder is returned.
When the drive recorder does not operate or when one-shot sampling ends in manual setting mode, this object returns "0"
(disabled status).
When the drive recorder function is operating, this object returns "1" (enabled status).
0: Disabled status
1: Enabled status
8.2

[Clear drive recorder history (Obj. 2C03h)]

[Clear drive recorder history (Obj. 2C03h: 00h)]

Data Type Access
U16 RW
Description
Writing "1EA5h", cycling the power, or performing a software reset clears the data in the drive recorder history.
When the object is read, "0000h" is returned.
8.3

[Power ON cumulative time (Obj. 2C18h)]

[Power ON cumulative time (Obj. 2C18h: 00h)]

Data Type Access
U32 RO
Description
Returns the cumulative energization time of the servo amplifier.
8.4

[Number of inrush relay on/off times (Obj. 2C19h)]

[Number of inrush relay on/off times (Obj. 2C19h: 00h)]

Data Type Access
U32 RO
Description
The number of times that the inrush relay of the servo amplifier has been turned on/off is returned.
Mapping Default
Impossible 0
Mapping Default
Impossible 0000h
Mapping Default

Impossible
Mapping Default
Impossible 
Range Units
0 to 1 
Range Units
0000h to FFFFh 
Range Units
00000000h to hour
FFFFFFFFh
Range Units
00000000h to number of times
FFFFFFFFh
8 Manufacturer Specific Control Object
8.1 [Drive recorder status (Obj. 2C02h)]
Save Parameter
Impossible 
Save Parameter
Impossible 
Save Parameter

Impossible
Save Parameter
Impossible 
8
51